China 380V 50Hz Integrated Screw Air Compressor 20HP with Air Tank mini air compressor

Product Description

Product Description

Item Parameters

Model Working Stress Capacity Motor Electrical power Sound stage Lubricant oil Air tank Dimension(mm) Internet Fat
Psi bar Cfm m3/min kw/hp (dB) (L) (L) L W H KGS
SGT08 116 8 39 1.one 7.5/ten 63~sixty seven 5.four 300 1620 720 1470 380
one hundred forty five ten 32 .nine
SGA11 116 eight 53 one.five  11 /15 63~sixty seven 7 500 1620 720 1600 420
one hundred forty five ten forty six one.three
SGA15 116 eight 81 two.3 15/20 63~67 8 500 1620 720 1600 450
a hundred forty five 10 74 two.one

Sensible Integration

1.Heading far over and above combining the compressor, dryer and filters in 1 deal, wise integration also:

• Eradicates susceptible interconnecting piping 
• Minimizes force losses and drops 
• Integrates the compressor, dryer and filter into an vitality-minimizing, optimized system 
• Incorporates the total source-aspect system into 1 whisper-silent package, enabling set up almost wherever
• Supplies generous area to encourage cooling and to permit unobstructed service

two. Dry and Clean Compressed Air
• All  Air System deals occur fully equipped with an integral, strength-conserving air treatment method centre including a large-overall performance air dryer and filtration pack to remove h2o, oil and particles from the air stream. 
• All factors are perfectly matched to provide the appropriate air top quality to enhance air-driven resource and method equipment life.

Business Profile

 

After Product sales Service

 

FAQ

Q1: What is the rotor velocity for the air finish?

A1: 2980rmp.

Q2: What is your direct time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you supply water cooled air compressor?
A3: Sure, we can (normally, air cooled sort).

Q4: What’s the payment phrase?
A4: T/T, L/C, Western Union, and so on. Also we could acknowledge USD, RMB, and other currency.

Q5: Do you accept tailored voltage?
A5: Yes. 380V/50Hz/3pH, 380V/60Hz/3pH, 220V/50Hz/3pH, 220V/60Hz/3pH, 440V/50Hz/3pH, 440V/60Hz/3pH, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One yr for the whole air compressor(not such as the use spare components) and technological supports can be supplied according to your wants.

Q7: Can you acknowledge OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your client services and right after-income provider?
A8: 24hrs on-line help, 48hrs difficulty solved promise.

Q9: Do you have spare components in stock?
A9: Sure, we do.

Q10: What type of first lubrication oil you used in air compressor?
A10: Whole 46# mineral oil.

There are other types of air compressors and add-ons in the store, you can verify it in the shop or ship a message to me
If you have any concerns, make sure you do not hesitate to contact us. Many thanks!  

 

 

 

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:

###

Model Working Pressure Capacity Motor Power Noise level Lubricant oil Air tank Dimension(mm) Net Weight
Psi bar Cfm m3/min kw/hp (dB) (L) (L) L W H KGS
SGT08 116 8 39 1.1 7.5/10 63~67 5.4 300 1620 720 1470 380
145 10 32 0.9
SGA11 116 8 53 1.5  11 /15 63~67 7 500 1620 720 1600 420
145 10 46 1.3
SGA15 116 8 81 2.3 15/20 63~67 8 500 1620 720 1600 450
145 10 74 2.1
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:

###

Model Working Pressure Capacity Motor Power Noise level Lubricant oil Air tank Dimension(mm) Net Weight
Psi bar Cfm m3/min kw/hp (dB) (L) (L) L W H KGS
SGT08 116 8 39 1.1 7.5/10 63~67 5.4 300 1620 720 1470 380
145 10 32 0.9
SGA11 116 8 53 1.5  11 /15 63~67 7 500 1620 720 1600 420
145 10 46 1.3
SGA15 116 8 81 2.3 15/20 63~67 8 500 1620 720 1600 450
145 10 74 2.1

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 380V 50Hz Integrated Screw Air Compressor 20HP with Air Tank     mini air compressorChina 380V 50Hz Integrated Screw Air Compressor 20HP with Air Tank     mini air compressor
editor by czh 2022-11-26