China 30HP Best Quality Screw Air Compressor AC air compressor oil

Merchandise Description

 

Characteristics Of Direct Pushed Screw Air Compressor

1 . Air stop with large-performance

two. Double Screw with lower noise, Super Silenced Enclosure

three. Stylish compact style. Fully open up access door to internal components for easy support.

four. a hundred% Constant obligation operation. Load/No Load procedure

5. Substantial top quality CE Certification industrial electric motors. ISO,CE,UL Certificate

six. Easy to use and study Liquid crystal display management panel

7. Large temperature, high pressure and anti-rotation shutdown

8. Vitality productive operation

nine. 5 micron, drinking water-resistant air filtration content

10. 1year total equipment warranty,3years air conclude warranty.

eleven. Provide the equipment with various functioning voltage according to customer’s request, 
this sort of as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.

 

TCEHNICAL Technical specs OF THE Direct Driven SCREW AIR COMPRESSOR
Design SY-30A SY-50A SY-75A SY-100A SY-120A/W SY-150A/W SY-175A/W SY-220A/W SY-250A/W SY-300A/W SY-350A/W
Totally free air supply /Discharge stress (m3/min /Mpa) 3.8/.seven
3.6/.eight
three.2/1.
2.8/1.two
six.8/.seven
six.2/.8
5.6/1.
4.9/1.two
ten./.seven
9.1/.eight
eight.5/1.
seven.6/1.two
13.5/.7
twelve.6/.8
11.2/1.
ten./1.two
sixteen.1/.seven
fifteen./.8
13.8/1.
12.3/1.two
21./.seven
19.8/.8
seventeen./1.
fifteen.3/1.2
25.2/.7
24./.8
21./1.
eighteen.3/1.2
28.7/.7
27.6/.eight
24.6/1.
21.5/1.2
32./.seven
thirty.5/.8
27.5/1.
24.8/1.two
36.7/.seven
34.5/.eight
thirty.2/1.
27.8/1.2
forty two./.7
40.5/.8
38.1/1.
34.6/1.2
No.of compression stage one phase
Ambient temperature ‘-5–+forty fiveoC
Cooling design Air –Cooling Air-Cooling&Drinking water-Cooling Water-Cooling
Discharge temperature (0C) Ambient temperature+15oC
Lubricant(L) 18 thirty 65 90 110
Sound amount (Db) 68±2 72±2 75±2 72±2
Drive strategy Immediate generate
Electricity (V/ph/Hz) 380/3/50
Electricity (KW/HP) 22/thirty 37/fifty 55/75 seventy five/100 ninety/a hundred and twenty 110/one hundred fifty 132/a hundred seventy five a hundred and fifty/200 185/250 220/300 250/350
Starting technique Y-ΔStarter
Dimension: length/ width/ top
(mm)
1400*
900*
1220
1400*
900*
1220
1800*
1200*
1600
1900*
1200*
1600
2100*
1400*
1780
2360*
1360*
1800
2460*
1420*
1800
2560*
1540*
1840
2610*
1640*
2050
2700*
1740*
2100
2900*
1850*
2200
Weight(kg) 680 1060 1880 1980 2100 2900 3500 3900 4200 4600 5000
Air outlet pipe diameter (inch/mm) one” one 1/2″ 2″ DN65 DN80 DN100

 

 
Item exhibit

 

Our Services
 

Right after-sale Support

• Any inquiries or requests before, for the duration of or after revenue, we would like to assist you any time and will locate you the greatest solution in 24 several hours.

• Guarantee: One particular calendar year for the entire machine Legitimate spare areas will be presented with very best cost.

• More than board engineer service is accessible.

 

Special Custom-made Provider

1) Full OEM

• Amount: at least 5 pcs

• In this strategy, we will do all the alterations (Colour, title plate and brand) as your need to have, and will not cost added fee.

two) Half OEM

• Amount: no limit

• Below this plan, we can make the required alteration (name plate and brand) but we will charge some added payment for the identify plate, as the title plate manufacturing unit has the MOQ.

three) Brand OEM

• Amount: no restrict

• Only the brand will be transformed to yours, and no further fee will be charged.

 

Abroad Engineer Provider

• We are accessible to deliver our engineer for aboard services. Only need you to prepare the lodging, transportation and translator. Extra cost for each and every will be talked about primarily based on neighborhood cost level.

FAQ

Q1: Warranty conditions of your equipment?
A3: One particular year guarantee for the machine and specialized assistance in accordance to your wants.

 

Q2: Will you supply some spare components of the machines?
A4: Indeed, of course.

 

Q3: What about item bundle?
A5: We pack our goods strictly with common seaworthy scenario.

 

This autumn: What about the voltage of products?
Can they be customized? A6: Sure, of training course. The voltage can be custom-made according to your equirement.

 

Q5: Which payment term can you take?
A7: fifty% T/T in innovative, fifty% T/T ahead of delivery.

 

Q6: How extended will you take to prepare manufacturing?
A8: 380V 50HZ we can supply the merchandise inside 7-15 times. Other electrical power or other color we will shipping inside 25-30 days.

 

Q7: Can you accept OEM orders?
A9: Sure, with professional style crew, OEM orders are hugely welcome.

 

Q8: Which trade term can you take?
A10: Available trade conditions: FOB, CIF, CFR, EXW, CPT, and so forth.

US $2,500-10,000
/ set
|
1 set

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Type: Screw
Performance: Low Noise
Drive Mode: Electric
Power Source: Diesel

###

Customization:

###

TCEHNICAL SPECIFICATIONS OF THE DIRECT DRIVEN SCREW AIR COMPRESSOR
Model SY-30A SY-50A SY-75A SY-100A SY-120A/W SY-150A/W SY-175A/W SY-220A/W SY-250A/W SY-300A/W SY-350A/W
Free air deliver /Discharge pressure (m3/min /Mpa) 3.8/0.7
3.6/0.8
3.2/1.0
2.8/1.2
6.8/0.7
6.2/0.8
5.6/1.0
4.9/1.2
10.0/0.7
9.1/0.8
8.5/1.0
7.6/1.2
13.5/0.7
12.6/0.8
11.2/1.0
10.0/1.2
16.1/0.7
15.0/0.8
13.8/1.0
12.3/1.2
21.0/0.7
19.8/0.8
17.0/1.0
15.3/1.2
25.2/0.7
24.0/0.8
21.0/1.0
18.3/1.2
28.7/0.7
27.6/0.8
24.6/1.0
21.5/1.2
32.0/0.7
30.5/0.8
27.5/1.0
24.8/1.2
36.7/0.7
34.5/0.8
30.2/1.0
27.8/1.2
42.0/0.7
40.5/0.8
38.1/1.0
34.6/1.2
No.of compression stage single stage
Ambient temperature ‘-5–+45oC
Cooling model Air –Cooling Air-Cooling&Water-Cooling Water-Cooling
Discharge temperature (0C) Ambient temperature+15oC
Lubricant(L) 18 30 65 90 110
Noise level (Db) 68±2 72±2 75±2 72±2
Drive method Direct drive
Electricity (V/ph/Hz) 380/3/50
Power (KW/HP) 22/30 37/50 55/75 75/100 90/120 110/150 132/175 150/200 185/250 220/300 250/350
Starting method Y-ΔStarter
Dimension: length/ width/ height
(mm)
1400*
900*
1220
1400*
900*
1220
1800*
1200*
1600
1900*
1200*
1600
2100*
1400*
1780
2360*
1360*
1800
2460*
1420*
1800
2560*
1540*
1840
2610*
1640*
2050
2700*
1740*
2100
2900*
1850*
2200
Weight(kg) 680 1060 1880 1980 2100 2900 3500 3900 4200 4600 5000
Air outlet pipe diameter (inch/mm) 1" 1 1/2" 2" DN65 DN80 DN100
US $2,500-10,000
/ set
|
1 set

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Type: Screw
Performance: Low Noise
Drive Mode: Electric
Power Source: Diesel

###

Customization:

###

TCEHNICAL SPECIFICATIONS OF THE DIRECT DRIVEN SCREW AIR COMPRESSOR
Model SY-30A SY-50A SY-75A SY-100A SY-120A/W SY-150A/W SY-175A/W SY-220A/W SY-250A/W SY-300A/W SY-350A/W
Free air deliver /Discharge pressure (m3/min /Mpa) 3.8/0.7
3.6/0.8
3.2/1.0
2.8/1.2
6.8/0.7
6.2/0.8
5.6/1.0
4.9/1.2
10.0/0.7
9.1/0.8
8.5/1.0
7.6/1.2
13.5/0.7
12.6/0.8
11.2/1.0
10.0/1.2
16.1/0.7
15.0/0.8
13.8/1.0
12.3/1.2
21.0/0.7
19.8/0.8
17.0/1.0
15.3/1.2
25.2/0.7
24.0/0.8
21.0/1.0
18.3/1.2
28.7/0.7
27.6/0.8
24.6/1.0
21.5/1.2
32.0/0.7
30.5/0.8
27.5/1.0
24.8/1.2
36.7/0.7
34.5/0.8
30.2/1.0
27.8/1.2
42.0/0.7
40.5/0.8
38.1/1.0
34.6/1.2
No.of compression stage single stage
Ambient temperature ‘-5–+45oC
Cooling model Air –Cooling Air-Cooling&Water-Cooling Water-Cooling
Discharge temperature (0C) Ambient temperature+15oC
Lubricant(L) 18 30 65 90 110
Noise level (Db) 68±2 72±2 75±2 72±2
Drive method Direct drive
Electricity (V/ph/Hz) 380/3/50
Power (KW/HP) 22/30 37/50 55/75 75/100 90/120 110/150 132/175 150/200 185/250 220/300 250/350
Starting method Y-ΔStarter
Dimension: length/ width/ height
(mm)
1400*
900*
1220
1400*
900*
1220
1800*
1200*
1600
1900*
1200*
1600
2100*
1400*
1780
2360*
1360*
1800
2460*
1420*
1800
2560*
1540*
1840
2610*
1640*
2050
2700*
1740*
2100
2900*
1850*
2200
Weight(kg) 680 1060 1880 1980 2100 2900 3500 3900 4200 4600 5000
Air outlet pipe diameter (inch/mm) 1" 1 1/2" 2" DN65 DN80 DN100

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China 30HP Best Quality Screw Air Compressor AC     air compressor oilChina 30HP Best Quality Screw Air Compressor AC     air compressor oil
editor by czh 2023-01-20